Knauf PFT

Reinforcing mortar

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Special mortar

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
20117000	Clamp D-pumps
20115310	Stator D 4-3, 1/2 output, green,for clamp
20114320	Rotor D 4-3 with pin
20118400	ROTOQUIRL cpl. with couplings
00010543	Stator D 4-3 PIN TWISTER green
20118780	Tie rods (1 set = 2 pieces)
00130205	Water pressure booster pump PFT AV 3000, 50 Hz
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00020388	PFT JETSET cpl.
20195000	ZARGOMAT- and gluing gun with 15 m cable, 25 female part
20200330	Adapter coupling 35-/25 male
00102228	Mortar pressure gauge 35 mm
20103510	Mixing shaft G 4 / G 5 hard-faced

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Masonry mortar

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
7	40		26	25	R 7-2,5

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
20196000	Spraying gun 35 V cap S14 (cone) with drilling
00102228	Mortar pressure gauge 35 mm
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
20104217	Suction flange R-pump with O-ring, l = 200 mm
20118820	Pressure flange R-pump
20116350	Stator R 7-2.5
20114851	Rotor R7-2.5 with shot peening
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz
20117800	Clamp R-pump

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Grouting mortar

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
20195000	ZARGOMAT- and gluing gun with 15 m cable, 25 female part
20118400	ROTOQUIRL cpl. with couplings
20114320	Rotor D 4-3 with pin
20115310	Stator D 4-3, 1/2 output, green,for clamp
20117000	Clamp D-pumps
00010543	Stator D 4-3 PIN TWISTER green
20118780	Tie rods (1 set = 2 pieces)
00130205	Water pressure booster pump PFT AV 3000, 50 Hz
20200330	Adapter coupling 35-/25 male
00020388	PFT JETSET cpl.
00102228	Mortar pressure gauge 35 mm
20103510	Mixing shaft G 4 / G 5 hard-faced
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment