Knauf PFT

Insulating mortar

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
4	35	30	40	15	D 8-1,5

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

No data available.

Gypsum plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	20	25	40	30	D 6-3
3	25	20	40	25	D 7-2,5
3	22	25	40	25	D 5-2,5 mf TWISTER

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Gypsum-lime plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	20	25	40	30	D 6-3
3	25	20	40	25	D 7-2,5
3	22	25	40	25	D 5-2,5 mf TWISTER

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Light gypsum plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	20	25	40	30	D 6-3
3	25	20	40	25	D 7-2,5
3	22	25	40	25	D 5-2,5 mf TWISTER

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103610	Mixing shaft G 4/G 5 for light plaster
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Scratch coat

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
4	35		26	15	D 8-1,5

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103610	Mixing shaft G 4/G 5 for light plaster
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Light base coat

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
7	40		40	25	R 7-2,5

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103610	Mixing shaft G 4/G 5 for light plaster
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Loam plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	20		50	30	D 6-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103610	Mixing shaft G 4/G 5 for light plaster
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Restoration plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3
3	22	25	40	25	D 5-2,5 mf TWISTER
3	20	25	40	30	D 6-3
4	35		26	15	D 8-1,5
3	20	20		20	D 4-2 LP(Air voids)

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00002070	Rotor D 5-2.5 with tang
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20118400	ROTOQUIRL cpl. with couplings
20118000	ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Float finish

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
2	8	30		30	D 3-4

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00002070	Rotor D 5-2.5 with tang
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20118400	ROTOQUIRL cpl. with couplings
20118000	ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Levelling compound

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00002070	Rotor D 5-2.5 with tang
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20118400	ROTOQUIRL cpl. with couplings
20118000	ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Special plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00002070	Rotor D 5-2.5 with tang
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20118400	ROTOQUIRL cpl. with couplings
20118000	ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Decoration plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
2	8	30		30	D 3-4

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00002070	Rotor D 5-2.5 with tang
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20118400	ROTOQUIRL cpl. with couplings
20118000	ROTOMIX for D-pumps cpl. with coupling 35 female and coupling reduction 35/25 male ID 24
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Base coat

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	20	25	40	30	D 6-3
3	25	30	40	25	D 7-2,5
4	35	40	60	15	D 8-1,5
7	40	40	60	25	R 7-2,5
3	22	25	40	25	D 5-2,5 mf TWISTER

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

Finish coat plaster

Grain size max. mm	Conveying output* l/min (at approx. 400 rpm)	Conveying distance* max. in m, 25er hose	Conveying distance* max. in m, 35er hose	Working pressure max. bar	Rotor / Stator
3	12	30		30	D 4-3

* Indicative depending on quality, mortar mortar composition, mortar consistency, pumps execution, pumps condition, transport tube diameter and transport height. Authoritative are ultimately the specific directives of the Material producer.

Part no.	Description
00021399	Rotor D 5-2.5
00010904	Stator D 5-2,5 PIN TWISTER TWISTER
20118780	Tie rods (1 set = 2 pieces)
20103510	Mixing shaft G 4 / G 5 hard-faced
00102228	Mortar pressure gauge 35 mm
20200330	Adapter coupling 35-/25 male
20190002	Spraying gun 25 mm cap S14 (cone) 200 mm mortar cpl.
00021119	RONDO 35 mm, 13.3 m, cpl. with hydraulically fitted couplings
00130205	Water pressure booster pump PFT AV 3000, 50 Hz

• Standard equipment
• Standard equipment depending on type of PFT G 4/G 5
• No standard equipment

PFT Accessories guide

Plaster/render

Insulating mortar

Gypsum plaster

Gypsum-lime plaster

Light gypsum plaster

Scratch coat

Light base coat

Loam plaster

Tyrolean finish

Restoration plaster

Float finish

Levelling compound

Special plaster

Decoration plaster

Base coat

Finish coat plaster