Knauf PFT » Cutting table

Cutting table

Aside from the well-known plastering machines and the proven mixing pumps, PFT also supplies solutions for dry wall construction. The portable board cutting table PFT BOARDMASTER is the revolution in dry wall construction.

PFT BOARDMASTER contact form

Animation: Application video PFT BOARDMASTER

Brochure: PFT BOARDMASTER XL - The portable board cutting table

Description

The revolution in dry wall construction
Save up to 70 % of your time thanks to the cutting wonder!

Here you can find a VIDEO to PFT BOARDMASTER

PFT BOARDMASTER - The portable board cutting table for the processing of gypsum boards and similar materials for board sizes up to 300x130x4cm (length x width x height) was especially designed for the facade and interior construction. It is flexibly applicable and perfectly suitable for fast, clean and cost-efficient processing of various materials - especially in the dry wall construction sector:

Gypsum boards
Gypsum fibre boards
Fire protection boards
MDF boards
Plastic boards
Wooden boards
Aludibond boards
Alucobond boards
and many more

No matter if walls or ceilings, duct linings or fire resistive walls, columns, lamellar or other cut-outs – the application fields of the PFT BOARDMASTER are numerous and it supplies lots of advantages. Convince yourself and save up to 70% of your working time.

Accessories

A wide selection of accessories and additions is available for PFT BOARDMASTER.

Applications

The PFT BOARDMASTER is fast an fexible applicable.

Here you can find a VIDEO to PFT BOARDMASTER

Fields of application:

Walls

Flexible connection of noise insulation and/or fire-resistive systems
Wall connections
Expansion joints
Curves
Round and segmental arches
Timber installation
Fanlight walls
Sliding door linings
Room corners (also in round form)
Alcoves and recesses
Wall openings & passages
Lamellar cut-outs (e.g. lowered base)

Time savings of 20 – 70 % compared to traditional processing

Cut-outs

Cut-out for sanitary equipment (with stencil)
Arch segments
Various openings

Time-savings of 45 – 60 % compared to traditional processing

Duct linings

Duct linings
Ventilation duct – angular or round
Storage areas and shelves

Time savings of 60 – 70 % compared to traditional processing

Ceilings

Expansion joints
Ceiling connection
Perforated ceilings, cutting of perforated boards, ceiling blinds and grading
indirect lighting
Canvas ceilings
Light bars – mock coverings
inspection flap

Time-savings of 35 – 70 % compared to traditional processing

Columns and lamellar cut-outs

canted columns plus basement
Pilaster and fluting, lamellar cut-outs (up to 3 x 12.5 mm resp. 40 mm in total)

Time-savings of 55 – 70 % compared to traditional processing

Edging and edges with round bar

By cutting of the gypsum boards and the application of round bars there is no need to apply edge protection and trowel plasters. The processing can be done significantly cleaner and in no time.

Advantages

Advantages at a glance:

fast, time and cost saving
clean and dust-free work
huge material saving due to exact processing
flexible

Mobility means flexibility!

The portable cutting table can be disassembled and transported easily. Thus, great projects can be carried out on the spot.

High precision unit with quick changer retainer

Lamellar cut-outs (up to 3 x 12.5 mm resp. 40 mm total)

Perfect processing by digital display of position and exact fixation - in up to now unknow quality

Perfect circulatity with stencil (additional)

Tech. data

Part no.	Description	Details
00184718	PFT BOARDMASTER XL
00207686	PFT BOARDMASTER L

Accessories

Part no.	Description	Picture
00184718	PFT BOARDMASTER XL Standard equipment - Mobile cutting and moulding table, 230 V with machine head including transport box, under-table, stand for construction plan, pneumatic aggregat lifting system, weight-unloading, key set and operating instruction - Milling unit 1050 Watt, 230 V - Sawing unit universal for longitudinal axis, 230 V - Sawing unit universal for diagonal axis, 230 V - PFTfix special compressor, 230 V - 2 Saw blades Ø 160 mm, cutting width: 1.8 mm - Copy milling and cutting burr 16 mm, for board thickness of up to 15 mm - V-groove milling cutter 90°, up to 15 mm board thickness - PFTstrong circular milling cutter Ø 4 mm, for board thickness of up to 15 mm - Copy and scanning plate Ø 25 mm - PFTfix glue gun TEC 6100, 230 V - PFTfix primer (water-based), 10 l canister (for priming the gluing surface) - PFTfix hot-melt adhesive, white (for gluing moulded parts) (packaging unit: 10 kg) - Industrial exhaust system 50 l cpl., 230 V - Circular template for cut-outs of up to Ø 1,200 mm, fully adjustable - Pneumatic extension tube 10 m - Transport box for undertable, without content (L/W/H: 3,800 x 1,660 x 630 mm)
00207686	PFT BOARDMASTER L Standard equipment - Mobile cutting and moulding table, 230 V with machine head including transport box, under-table, stand for construction plan, key set and operating instruction - Milling unit 1050 Watt, 230 V - Sawing unit universal for longitudinal axis, 230 V - Sawing unit universal for diagonal axis, 230 V - 2 Saw blades Ø 160 mm, cutting width: 1.8 mm - Copy milling and cutting burr 16 mm, for board thickness of up to 15 mm - V-groove milling cutter 90°, up to 15 mm board thickness - PFTstrong circular milling cutter Ø 4 mm, for board thickness of up to 15 mm - Copy and scanning plate Ø 25 mm - PFTfix glue gun TEC 6100, 230 V - PFTfix primer (water-based), 10 l canister (for priming the gluing surface) - PFTfix hot-melt adhesive, white (for gluing moulded parts) (packaging unit: 10 kg) - PFTfix special compressor, 230 V - Industrial exhaust system 50 l cpl., 230 V - Circular template for cut-outs of up to Ø 1,200 mm, fully adjustable - Transport box for undertable, without content (L/W/H: 3,800 x 1,660 x 630 mm)

Recommended accessories
Part no.	Description	Picture
00206422	Tool kit, complete
00206424	Tool kit, small
00207783	Milling set
00207784	V-groove milling cutter 90°, up to 15 mm board thickness
00207785	PFTstrong groove milling cutter for flat staves, up to a board thickness of 12.5 mm / 1/2"
00207786	V-groove milling cutter 90°, up to 25 mm board thickness
00207787	V-groove milling cutter 90°, up to 15 mm board thickness for jamming with adhesive film
00207788	PFTstrong circular milling cutter Ø 4 for board thickness of up to 12.5 mm / 1/2" board thickness
00207789	Copy milling and cutting burr 16 mm, for board thickness of up to 15 mm
00207790	Saw blade Ø 160 mm, cutting width: 1.8 mm
00207792	Milling set case, without content
00207793	Copy milling and cutting burr 7 mm, for board thickness of up to 6 mm
00207796	Copy milling and cutting burr 26 mm, for board thickness of up to 25 mm
00207797	8 mm end milling cutter for wood, Ø 8 x 20 mm
00207799	V-groove milling cutter 45°, for board thickness 15 mm
00207800	Fluting cutter Ø 20 mm
00207801	Copy and scanning plate Ø 25 mm
00207802	Fluting cutter Ø 16 mm
00207807	Fluting cutter Ø 24 mm
00207808	PFTrev slotting cutter Ø 1 mm, for board thickness of up to 15 mm
00207809	Tile joint milling cutter
00207810	V-groove milling cutter 135°, for board thickness of up to 12.5 mm
00207812	Profile slotting cutter (for fabricated pattern profiles)
00207820	Milling unit 1800 Watt, 230 V
00207823	Milling unit 1050 Watt, 230 V
00207824	Milling unit 1050 Watt, 120 V
00207826	Sawing unit universal for longitudinal axis, 230 V
00207827	Sawing unit universal for longitudinal axis, 120 V
00207828	Sawing unit universal for diagonal axis, 230 V
00207829	Sawing unit universal for diagonal axis, 120 V
00207830	Sawing unit 5-fold universal for longitudinal axis, 230 V
00207831	Sawing unit 5-fold universal for longitudinal axis, 120 V
00207832	Sawing unit 5-fold universal for diagonal axis, 230 V
00207833	Sawing unit 5-fold universal for diagonal axis, 120 V
00207834	Industrial exhaust system 50 l cpl., 230 V
00207835	Vac control box for 120 V equipment
00207836	Industrial exhaust system 50 l cpl., 120 V
00207839	PFTfix prime applicator (for applying PFTfix primer)
00207840	PFTfix glue gun TEC 6100, 230 V
00207841	PFTfix glue gun TEC 6100, 120 V
00207842	MDF template for sanitary cut-outs
00207844	Suction adapter for cleaning the equipment, length: 2 m
00207845	Replacement spacer for circular templates, length: 2,900 mm
00207847	Copy and scanning plate Ø 32 mm
00207848	PFTform gluing table (for gluing moulded parts, including illumination)
00207849	PFTset positioning carriage (for stable storage of the glued moulded parts)
00207850	PFTset flute positioning device (for stable storage of soffit boards)
00207852	Sliding plate 1400/1800 Watt for fabricating the notch at the external soffit boards
00207854	PFTroll 310 insulation strip dispenser (for applying self-adhesive insulation strip)
00207856	PFTfix glue gun TEC 3200
00207858	PFTfix special compressor, 230 V
00207860	PFTfix special compressor, 120 V
00207861	PFTfix extension for glue gun 10 m
00207862	PFTfix extension for glue gun 10 m, 120 V
00207863	Pneumatic extension tube 10 m
00207864	Pneumatic extension tube 10 m, 120 V
00207865	Saw blade Ø 150 mm, cutting width: 1.8 mm
00207866	Saw blade Ø 120 mm, cutting width: 1.8 mm
00207868	Saw blade Ø 100 mm, cutting width: 1.8 mm
00207869	Saw blade set Ø 120 mm, cutting width: 1.8 mm (packaging unit: 5 pcs.)
00207871	Diamond saw blade Ø 160 mm
00207883	Diamond cutting disc universal Ø 125 mm
00207884	Diamond cutting disc universal Ø 115 mm
00207888	Diamond cutting disc universal set Ø 115 mm (packaging unit: 5 pieces)
00207889	Diamond coated saw blade Ø 160 mm
00207890	V-groove saw blade for aluminium compounds (90° V-cuts, for material thickness of up to 10 mm)
00207891	PFTrev access hinge milling cutter 5.5 mm
00207893	Copy and milling cutter without countersink 26 mm, for board thickness of up to 25 mm
00207895	End milling cutter 8 mm for wood, PCD-coated, Ø 8 x 20 mm
00207911	V-groove milling cutter 60° for board thickness of up to 12.5 mm
00207914	V-groove milling cutter 30° for board thickness of up to 15 mm
00207916	V-groove special milling cutter 90° PCD-coated, for board thickness of up to 15 mm
00207921	V-groove milling cutter 120°, for board thickness of up to 12.5 mm
00207987	PFTrev slotting cutter Ø 1 mm, for board thickness of up to 12.5 mm
00207988	PFTrev slotting cutter Ø 1 mm, for board thickness of up to 1/4"
00207990	PFTrev slotting cutter Ø 1 mm, for board thickness of up to 5/8 "
00207991	PFTrev slotting cutter Ø 1.5 mm, for board thickness of up to 12.5 mm
00207994	PFTstrong circular milling cutter Ø 4 mm, for board thickness of up to 15 mm
00207997	PFTstrong circular milling cutter Ø 4.3 mm, for board thickness of up to 12.5 mm
00207998	PFTstrong circular milling cutter Ø 5 mm for board thickness of up to 12.5 mm
00207999	PFTstrong circular milling cutter Ø 8 mm, for board thickness of up to 12.5 mm
00208000	PFTstrong circular milling cutter Ø 10 mm, for board thickness of up to 12.5 mm
00208002	Notch and flute milling cutter for 19 mm boards
00208003	Soffit-edges milling cutter, internal
00208006	Soffit-edges milling cutter, for window area
00208009	Soffit-edges milling cutter, external
00208013	PFTfix primer 750 ml (for priming the glue surfaces)
00208015	PFTfix hot-melt adhesive, white (for gluing moulded parts) (packaging unit: 10 kg)
00208018	PFTfix hot-melt adhesive 25/43 (packaging unit: 10 kg)
00208019	PFTfix primer (water-based), 10 l canister (for priming the gluing surface)
00231461	PFTfix universal 310 ml (cartridge adhesive - for gluing moulded parts) (packaging unit: 20 cartridges)
00231462	PFTfix tape, reel: 50 m (double-sided adhesive foam band) (packaging unit: 10 reels)
00208064	Super adhesive
00208066	Activator for super adhesive
00208069	PFTstrong flat staves NIRO 1.5 x 9.5 mm, length: 3m
00208070	PFTstrong edge table (magnetic, for manufacturing flat staves)
00208071	PFTstrong acrylic glass rod Ø 4 mm, length: 2 m
00208072	PFTstrong acrylic glass rod Ø 5 mm, length: 2 m
00208075	PFTstrong acrylic glass rod Ø 8 mm, length: 2 m
00208076	PFTstrong steel rod, galvanized, Ø 4mm, length: 2 m
00208077	PFTstrong aluminium rod Ø 4 mm, length: 3 m
00208078	PFTstrong aluminium rod Ø 5 mm, length: 3 m
00208079	PFTstrong aluminium rod (tube) Ø 8 mm, length 2 m
00208087	Aqua Akkord fabric for curvatures, width: 1 m, reel: 50 m²
00208333	Replacement bearing, centric, for machine head
00209063	PFTstrong circular milling cutter Ø 3.3 mm, for board thickness of up to 12.5 mm
00209067	PFTstrong aluminium rod Ø 3.3 mm, length: 3 m
00226468	Circular template for cut-outs of up to Ø 1,200 mm, fully adjustable
00231458	Replacement bearing for unit switch at machine head (set: 4 pieces)
00233223	Pneumatic lifting unit
00239452	Retrofit kit pneumatic lifting unit
00264169	Sawing unit 5-fold universal for longitudinal axis including 5x saw blade Ø 120 mm

Spare parts
Part no.	Description	Picture
00208085	Machine table base plate (for BOARDMASTER XL)
00208086	MDF stop plate (for BOARDMASTER XL)
00208159	Housing for milling unit 1400 Watt
00208163	Carbon brush for milling unit 1050 Watt SUH
00208166	Housing for milling unit 1050 Watt
00208169	Milling motor 1050 Watt, 230 V
00208178	Milling motor 1050 Watt, 120 V
00208181	Housing for milling unit 1800 Watt
00208214	Milling motor 1800 Watt, 230 V
00208219	Sawing housing, longitudinal, universal
00208221	Sawing housing, diagonal, universal
00208222	Sawing housing 5-fold longitudinal universal
00208223	Sawing housing 5-fold diagonal universal
00208234	Sawing motor, longitudinal / diagonal, 5-fold, universal, 230 V
00208237	Sawing motor, longitudinal / diagonal, 5-fold, universal, 120 V
00208241	Carbon brush for sawing motor, longitudinal / diagonal, 5-fold, 120 V (set: 2 pieces)
00208242	Locking wheel for height stop at milling unit
00208248	Petinax sliding plate 900 Watt
00208251	Petinax sliding plate 1050 Watt
00208254	Petinax sliding plate 1400 / 1800 Watt
00208267	Suction hose junction for exhaustion equipment
00208270	Suction hose 25 mm in machine head
00208272	Suction hose including adapter Ø 38 mm, length: 3 m
00208274	Suction hose Ø 38 mm, length: 3 m
00208276	Sliding plate 1400/1800 Watt to fabricate the notch at the external soffit boards
00208286	Sliding plate 1400/1800 Watt to fabricate the notch at the internal soffit plate
00208306	Retaining screw (for mounting MDF stop plate), length: 45 mm (packaging unit: 100 pieces)
00208309	Retaining screw (for machine table base plate), length: 35 mm (packaging unit: 100 pieces)
00208310	Suction adapter for cleaning the equipment, without hose
00208311	Suction brush for cleaning the equipment
00208325	Locking screws including sliding blocks
00208334	Replacement bearing, eccentric, for machine head
00208335	Spare part - catcher at machine head
00208338	Weight unloading set for unit L/R
00208339	Guide rail, front, for BOARDMASTER XL, including bearing and bearing plate
00208340	Guide rail, front, for BOARDMASTER XL, including bearing and bearing plate
00208341	Digital display
00208342	Sensor for digital display
00208343	Magnetic tape, longitudinal, with guard plate
00208344	Magnetic tape, diagonal, with guard plate
00208346	PFTfix special nozzle, straight (for PFTfix glue gun)
00208347	PFTfix special nozzle, bent (for PFTfix glue gun)
00208348	Transport box for undertable, without content (L/W/H: 3,800 x 1,660 x 630 mm)
00215864	lluminating push button, white (resting)
00215866	Illuminating selection button, green
00231377	Carbon brush for milling motor 1400 Watt L/R, 230 V (set: 2 pieces)
00231417	Carbon brush for milling motor 1050 Watt L/R, 120/230 V (set: 2 pieces)
00231419	Carbon brush for milling motor 1800 Watt L/R, 230 V (set: 2 pieces)
00231420	Carbon brush for sawing motor, longitudinal / diagonal, 5-fold, universal, 120 V
00231421	Felt seal for exhaustion at machine head (set: 2 pieces)
00231435	O-ring-gasket for exhaustion at machine head (set: 2 pieces)
00231447	Dead stop set for longitudinal axis, front, L/R (set: 2 pieces)
00231449	Dead stop set for longitudinal axis, back, L/R (set: 2 pieces)
00231451	Dead stop set for diagonal axis, L/R (set: 2 pieces)
00231452	Locking lever for dead stops, front (set: 2 pieces)
00231454	Replacement bearing, front, for guide rail at front (set: 2 pieces)
00231456	Replacement bearing, back, for guide rail at back (set: 2 pieces)
00231459	Fuse set for control box (set: 4 pieces)
00235986	Replacement wheel 90° for PFTfix prime aplicator
00266766	Cover for tube 40 x 20